52 26 ... Removing And Installing/Replacing Rear Left Or Right Head Restraint Mount (Through-Loading)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2007 BMW 550i, 2007 BMW 530xi, 2007 BMW 530i, 2007 BMW 525xi, and 2007 BMW 525i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove padding for rear backrest. See REMOVING AND INSTALLING/REPLACING BACKREST FRAME FOR LEFT REAR SEAT (THROUGH-LOADING SYSTEM) and REMOVING AND INSTALLING/REPLACING BACKREST FRAME FOR RIGHT REAR SEAT (THROUGH-LOADING SYSTEM) .
- Left head restraint mount:
Release screws, remove head restraint mount.
Tightening torque: 52 24 2AZ . See REAR SEAT (NORMAL), MANUAL for specs.
Right head restraint mount:
Release screws, remove head restraint mount.
Tightening torque: 52 24 2AZ . See REAR SEAT (NORMAL), MANUAL for specs.