52 24 037 Removing And Installing/Replacing Seat Frame
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2007 BMW 550i, 2007 BMW 530xi, 2007 BMW 530i, 2007 BMW 525xi, and 2007 BMW 525i. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
Necessary preliminary tasks:
- Remove REAR SEAT
Removing seat frame:
- Feed cover welt (1) all round with special tool 00 9 317 out of retaining lugs (partly marked through recesses)
- Detach cover lugs in areas (2) from locking pins
- Carefully pull cover back to top side and pull Velcro-type fastener off frame
- Remove seat frame
Installation:
- Align and press on Velcro-type fastener
- Lay cable in opening of padding and through bore in frame
- Feed welt back in with special tool 00 9 317