72 14 ... Removing and installing/replacing Top Tether eyelets for child seat
WARNING: This page is about a different car, the 2008 BMW 550i, 2007 BMW 550i, and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Two or three Top Tether eyelets are installed, depending on the model.
Lever out covers (1) and release screws underneath.
Remove Top Tether eyelets (2).
Tightening torque: 52 24 03AZ . See REAR SEAT (NORMAL), MANUAL for specs.
IMPORTANT:
Ensure Top Tether eyelets (1) are in correct installation position.
It must be possible for Top Tether eyelets (1) to be tilted in the direction of head restraints (2).