67 31 570 Removing And Installing/Replacing Drive Unit For Head Restraint Height Adjustment On Left Or Right Front Seat

WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove REAR PANEL ON FRONT SEAT BACKREST .

Pull backrest cover (1) in direction of arrow over metal lugs (2) and detach.

If necessary, detach backrest cover on both sides from backrest frame.

Fig 1: Detaching Backrest Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Loosen screws (2).

Feed out drive unit for head restraint height adjustment in direction of arrow and remove.

Fig 2: Removing Drive Unit For Head Restraint Height Adjustment

Courtesy of BMW OF NORTH AMERICA, INC.