67 31 520 Removing And Installing/Replacing Drive Unit For Seat Height Adjustment

WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove FRONT SEAT .
Remove OUTER COVER ON FRONT SEAT .

Disconnect plug connection (1).

Loosen screws (2).

Feed out drive unit for seat height adjustment (3) and remove.

Fig 1: Removing Drive Unit For Seat Height Adjustment

Courtesy of BMW OF NORTH AMERICA, INC.

Comfort seat only:

Replacement:

INITIALIZE drive unit for seat height adjustment.