61 0 300 Releasing Tool (Complete Kit)

WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Measuring and testing equipment

Note: Replaces from 09/2005 special tool 61 1 150. From 06/2006 extended by tools 61 0 325 - 61 0 331.

Series: E30, E30/C, E30tou, E31, E32, E32/3, E34, E34tou, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E68, E70, E81, E82, E83, E85, E86, E87, E90, E91, E92, E93, R50, R52, R53, R55, R56, RR1, RR2

SI number: 2 05 05 (217)

Order number: 61 0 300

Releasing tool (complete kit)

Consisting of:

1 = 61 0 301 Release tool for round contacts (diameter 1.5)

Note: Replaces from 09/2005 special tool 61 1 131

2 = 61 0 302 Replacement sleeve D=1.5

Note: Replaces from 09/2005 special tool 61 1 157

In conjunction with: 61 3 301

3 = 61 0 303 Release tool for round systems with D=2.5

Note: Replaces from 09/2005 special tool 61 1 132

4 = 61 0 304 Replacement sleeve (D=2.5)

Note: Replaces from 09/2005 special tool 61 1 156

5 = 61 0 305 Release tool for round contacts (D=3.5)

Note: Replaces from 09/2005 special tool 61 1 133

6 = 61 0 306 Replacement sleeve (D=3.5) for 61 0 305

Note: Replaces from 09/2005 special tool 61 1 155

7 = 61 0 307 Release tool for socket-side round contacts (D=2.5)

8 = 610 308 Replacement sleeve for special tool 61 0 307 (D=2.5)

9 = 61 0 309 Release tool for pin-side round contact (D=1.5) manufacturer: Kostal

Note: Replaces from 09/2005 special tool 61 1 139

10 = 61 0 311 Replacement sleeve for special tool 61 0 309

Note: Replaces from 09/2005 special tool 61 1 154

11 = 61 0 312 Release tool for flat spring contact with a detent lug (1.6 mm)

Note: Replaces from 09/2005 special tool 61 1 134

12 = 61 0 313 Release tool for flat spring contacts with a snap-in pin (1.9 mm)

Note: Replaces from 09/2005 special tool 61 1 137

13 = 610 314 Release tool for flat spring contact with a snap-in pin (2.7 mm)

Note: Replaces from 09/2005 special tool 61 1 135

14 = 61 0 315 Release tool for flat spring contacts with double snap-in pin "Micro-Timer 2"

Note: Replaces from 09/2005 special tool 61 1 151

15 = 61 0 316 Release tool for flat spring contacts with double snap-in pin "SPT 4.8" "JPT 2.8"

Note: Replaces from 09/2005 special tool 61 1 136

16 = 61 0 317 Release tool for LSK 8

Note: Replaces from 09/2005 special tool 61 1 200

17 = 61 0 318 Release tool for "Maxi Power Timer 9.5"

Note: Replaces from 09/2005 special tool 61 1 180

18 = 61 0 319 Release tool for sensor laminated contacts ("SLK2.8")

Note: Replaces from 09/2005 special tool 61 1 148

19 = 61 0 321 Release tool for sensor laminated contacts with unlocking element ("SLK 2.8")

20 = 61 0 322 Release tool for mini laminated contact ("MLK1.2 mm")

21 = 61 0 323 Release tool for flat spring contacts with a detent lug (MQS)

Note: Replaces from 09/2005 special tool 61 1 152

22 = 61 0 324 Release tool for secondary locking

Note: Universal tool for damage-free opening/removal of secondary locks

23 = 61 0 329 Case with foam inlay without tools

Note: Storage system for release tools from set 61 0 300

24 = 61 0 325 Release tool "JPT"

25 = 61 0 326 Release tool "MQS"

Note: For releasing all micro contacts

26 = 61 0 327 Plug-in aid

Note: For inserting contacts (0.64 -1.2 mm) in housing

27 = 61 0 328 Plug-in aid

Note: For inserting contacts (2.8 - 4.8 mm) in housing

28 = 61 0 331 Release tool "SLK 5.8"

Note: For releasing "SLK 5.8 mm" contacts

Fig 1: Identifying Releasing Tool (Complete Kit) - 61 0 300

Courtesy of BMW OF NORTH AMERICA, INC.