LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1573 (Restraints - Tightening Torques) >> 12 Airbag Generator-Airbag Unit >> 72 12 Airbag Modules

72 12 Airbag Modules

WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES SPECIFICATION - AIRBAG MODULES

  Type Thread Tightening specification Measure
1AZ Side airbag module
(door/door trim panel)
E60 / E61 / E63 / E64   Replace screws 8 Nm
2AZ Passenger airbag module
(instrument panel)
E60 / E61 / E63 / E64 M6 Replace screws 8 Nm
3AZ Bracket, folding pack for AHPS head airbag, to body E60 / E61 Metal screw   2.5 Nm
  E63 Self-tapping   3 Nm
4AZ End fitting, AHPS head airbag, to body E60 / E61 / E63 M6   6 Nm
5AZ Airbag module/knee protection E63 / E64 M6 Replace screws 8 Nm
6AZ Push-in grommet, gas generator (A-pillar) E60 / E61 / E63 M6   6 Nm