21 21 Clutch Disc and Drive Plate
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW M5, 2009 BMW M5, 2008 BMW M5, 2007 BMW M5, and 2007 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
CLUTCH DISC AND DRIVE PLATE TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Work instruction | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Clutch to flywheel | E36 / E38 / E39 / E46 / E52 / E53 / E60 / E61 / E63 / E64 / E83 / E85 / E86 / E87 / E90 / E91 | M8 8.8 | Replace screws | 25 Nm |
| E36 / E38 / E39 / E46 / E52 / E53 / E60 / E61 / E63 / E64 / E83 / E85 / E86 / E87 / E90 / E91 | M8 10.9 | Replace screws | 34 Nm | ||
| Clutch to flywheel With ZNS bolts |
Replace ZNS bolts Jointing torque and angle of rotation must be observed without fail | ||||
| S85 / S65 | Jointing torque | 15 Nm | |||
| Torque angle | 25° | ||||
| N52, N53, N52K M47T2, N46T, N54, E92 N54 N46T, N43, N45K, N47, M57T2, N47S, N62TU | M8 10.9 | Jointing torque | 15 Nm | ||
| Torque angle | 90° ± 5° | ||||