Preconditions For Activation

BMW Night Vision is operational from terminal R.

Press the BMW Night Vision button.

BMW Night Vision will switch on in the following conditions:

• The rain-light sensor detects sufficient ambient light. Driving lights are off:

  BMW Night Vision is operational 2 seconds after the button is pressed. At the earliest 30 seconds after the vehicle is activated (navigation system booted). During these 2 seconds, a warning appears on the Control Display or Central Information Display.

• The rain-light sensor detects insufficient ambient light. Driving lights are on:

  BMW Night Vision is operational immediately after the button is pressed.

• The rain-light sensor detects insufficient ambient light. Driving lights are off. Road speed is less than 5 km/h (e.g. in dark driveways or garage entrances):

BMW Night Vision is operational immediately after the button is pressed.

BMW Night Vision is not  switched on in the following conditions:

• The rain-light sensor detects insufficient ambient light. Driving lights are off. Road speed greater than 5 km/h at the same time.

  A corresponding warning appears on the Control Display or Central Information Display.