LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1537 (Parts And Accessories - Repair Instructions) >> 12 Airbag Generator-Airbag >> 61 00 ... Repairing Airbag Cables >> Notes

61 00 ... Repairing Airbag Cables: Notes

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Only repair those cables which show visible signs of damage. In the event of visible damage, make sure there is only one cable repair in effect after the repair work. If no visible damage can be identified, the entire cable must be replaced. When carrying out repairs to the airbag wiring harness, you must use the spare parts offered in the Electronic Parts Catalogue (EPC).

Safety regulations: 

Safety regulations for handling components of airbag system  . See 72 00 ... SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS .

Instructions for disconnecting and connecting battery.  See 12 00 ... INSTRUCTIONS FOR DISCONNECTING AND CONNECTING BATTERY .