65 77 567 Removing And Installing/Replacing Control Electronics For Rear Seat Occupancy Detector (Comfort Seat)
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove rear seat padding completely . See 52 24 450 REPLACING PADDING FOR REAR SEAT .
Fold felt (1) upwards as illustrated.
Disconnect plug connections (2).
Feed out control electronics for rear seat occupancy detector (3) in direction of arrow and remove.