65 12 070 Removing And Installing/Replacing Amplifier
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Disconnect negative battery cable. See 61 20 900 DISCONNECTING AND CONNECTING BATTERY NEGATIVE LEAD .
- Remove luggage compartment wheel arch trim on left . See 51 47 151 REMOVING AND INSTALLING / REPLACING LEFT LUGGAGE COMPARTMENT WHEEL ARCH TRIM .
Pull out retaining plate (1) in direction of arrow.
Installation:
Make retaining plate (1) is correctly seated.
Remove amplifier (2) from holder (3).
Unfasten plug connection (4) and disconnect.