LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1533 (Heating And Air Conditioning - Repair Instructions) >> 11 Heater With Operation >> 64 11 991 Removing And Installing/Replacing Sensor For Automatic Recirculated Air Control (Automatic A/C High)

64 11 991 Removing And Installing/Replacing Sensor For Automatic Recirculated Air Control (Automatic A/C High)

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Remove design cover from engine.

Disconnect plug connection (1).

Feed out sensor for automatic recirculated air control in direction of arrow and remove.

Fig 1: Removing Sensor For Automatic Recirculated Air Control
G04768899Courtesy of BMW OF NORTH AMERICA, INC.