64 11 913 Removing And Installing/Replacing Temperature Sensor For Heating Unit (Automatic A/C High)

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Remove trim for instrument panel, bottom right. See 51 45 181 REMOVING AND INSTALLING INSTRUMENT PANEL TRIM AT BOTTOM RIGHT .

Remove center console trim at front right. See 51 16 195 REMOVING AND INSTALLING CENTER ARMREST (FRONT) .

Remove sound insulation for A/C unit at rear right.

Disconnect plug connection (1).

Pull out temperature sensor (2) in direction of arrow.

Fig 1: Pulling Out Temperature Sensor

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

When installing temperature sensor, pay attention to guide (1) in mount (2).

Fig 2: Identifying Guide And Mount

Courtesy of BMW OF NORTH AMERICA, INC.