64 11 853 Replacing SERVODRIVE For Right Rear Compartment Flap (Automatic A/C High)

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove function carrier on trim for instrument panel . See 51 16 170 REMOVING AND INSTALLING FUNCTION CARRIER ON PANEL FOR INSTRUMENT PANEL

Unclip cover (1) at both retaining hooks (2) and remove in direction of arrow.

Fig 1: Uncliping Cover At Retaining Hooks

Courtesy of BMW OF NORTH AMERICA, INC.

Press lock (1) and unclip servodrive for right rear compartment flap (2) in direction of arrow.

Disconnect plug connection (3) and remove servodrive for right rear compartment flap (2).

Installation:

If necessary, align shaft of flap(s) to be actuated to position of servodrive to be installed.

Fig 2: Uncliping Servodrive For Right Rear Compartment Flap

Courtesy of BMW OF NORTH AMERICA, INC.