64 11 844 Replacing SERVODRIVE For Ventilation/Defrosting Flaps (Automatic A/C High)
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove instrument panel trim . See 51 45 030 REMOVING AND INSTALLING INSTRUMENT PANEL TRIM .
NOTE:
For purposes of clarity, graphic shows servodrive with heater removed.
Disconnect plug connection (1).
Press lock (2) and unclip servodrive (3) in direction of arrow.
Installation:
If necessary, align shaft of flap(s) to be actuated to position of servodrive to be installed.