64 11 816 Replacing SERVODRIVE For Left Cold Air Duct (Automatic A/C High)
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove function carrier on trim for instrument carrier. See 51 16 170 REMOVING AND INSTALLING FUNCTION CARRIER ON PANEL FOR INSTRUMENT PANEL .
Press lock (1) and unclip servodrive (2) in direction of arrow.
Disconnect plug connection (3) and remove servodrive (2).
Installation:
If necessary, align shaft of flap(s) to be actuated to position of servodrive to be installed.