64 11 377 Removing And Installing (Replacing) Control Panel For Heater - A/C System

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove and install right trim on instrument panel. See 51 45 030 REMOVING AND INSTALLING INSTRUMENT PANEL TRIM .
Remove and install center trim on instrument panel. See 51 16 ... REMOVING AND INSTALLING SIDE PANELS ON CENTER CONSOLE .

Lever out clips (1).

Pull out control panel for heater - A/C system (2) in direction of arrow.

Disconnect plug connections behind and remove control panel for heater - A/C system (2).

Fig 1: Pulling Out Control Panel For Heater - A/C System

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out coding/programming.

Observe following IDC specifications:

Programming
Coding
Car & Key Memory
CD "CIP"

Fig 2: Identifying DIS Screen
Courtesy of BMW OF NORTH AMERICA, INC.