63 21 101 Replacing Sealing Frame For Left Or Right Rear Light (On Side Panel)
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove left or right rear light . See 63 21 180 REMOVING AND INSTALLING/REPLACING LEFT OR RIGHT REAR LIGHT (ON SIDE PANEL) .
Detach sealing frame for rear light (1) in direction of arrow from rear light (2).
Installation:
Sealing frame (1) is centered by way of openings for threaded pins (3).
Make sure sealing frame (1) is correctly bonded all round on rear light (2).