63 12 895 Replacing Drive For Left Adaptive Headlight

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Version with xenon headlights: Danger to life due to high voltage! Therefore disconnect all components from voltage supply before removal.
Work on the entire xenon lighting system (ignition unit, control unit and lamp) may only be carried out by specialist personnel.

Necessary preliminary tasks:

Remove left headlight. See 63 12 010 REMOVING AND INSTALLING LEFT HEADLIGHT (XENON HEADLIGHT) .

Release screws (1).

Remove drive for adaptive headlight (2) in direction of arrow from headlight (3).

Fig 1: Removing Drive For Adaptive Headlight From Headlight

Courtesy of BMW OF NORTH AMERICA, INC.

Carry out coding/programming . See VEHICLE PROGRAMMING AND CODING .