61 67 083 Removing And Installing/Replacing Left Or Right High-Pressure Nozzle Of Headlight Washer System (From 03/2005)

Special tools required: 

• 13 3 010 

Necessary preliminary tasks: 

• Remove front bumper trim  . See 51 11 156 REMOVING AND INSTALLING/REPLACING FRONT BUMPER TRIM (BMW ALPINA B7) .

To prevent excess escape of washer fluid, seal off end of high pressure line with special tool 13 3 010  .

Fig 1: Identifying Special Tool (13 3 010)

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock high-pressure line (2) and detach from high-pressure nozzle (1).

Release screws (3).

Remove high-pressure nozzle (1).

Installation: 

New spray nozzles are already preset.

Check function.

Fig 2: Identifying High-Pressure Line And High-Pressure Nozzle

Courtesy of BMW OF NORTH AMERICA, INC.