61 67 083 Removing And Installing/Replacing Left Or Right High-Pressure Nozzle Of Headlight Cleaning System

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

13 3 010

next work step front bumper trim.

To prevent excess escape of washer fluid, seal off end of high pressure line with special tool 13 3 010 .

Fig 1: Identifying Special Tool (13 3 010)

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock H.P. line (3) and detach from H.P. nozzle (1).

Release screws (2).

Remove H.P. nozzle (1).

Fig 2: Identifying H.P. Nozzle And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Slide guide (2) into opening (1).

New spray nozzles are already preset.

Carry out function check.

Fig 3: Identifying Slide Guide In Opening

Courtesy of BMW OF NORTH AMERICA, INC.