54 12 ... Replacing Complete Seal For Glass Slide/Tilt Sunroof (Frame)
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove complete glass slide/tilt sunroof (frame) . See 54 12 211 REMOVING AND INSTALLING COMPLETE GLASS SLIDE/TILT SUNROOF (FRAME) .
Mark one end point (marker pen on outside).
Detach seal (1) from sunroof (2).
Installation:
Start fitting new seal on marking.
Position seal gently only and align end points parallel to each other.
Press seal (1) firmly on frame (2) and ensure correct seating.