52 14 415 Replacing Support For Left Or Right Front Seat (Normal/Electric)
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
US/CDN front passenger seat (with OC3 mat) only:
The support can only be removed in conjunction with the OC3 mat.
If support is defective, both parts may only be replaced together.
After fitting new support, enable OC3 mat with BMW diagnosis system.
The support can only be removed in conjunction with the OC3 mat.
If support is defective, both parts may only be replaced together.
After fitting new support, enable OC3 mat with BMW diagnosis system.
The operation for removing the support with/without OC3 mat is described in:
- Removing seat cover on left or right front seat . See 52 14 400 REPLACING SEAT COVER FOR LEFT OR RIGHT FRONT SEAT (NORMAL/ELECTRIC) .
Enabling seat occupancy detector (OC3 mat):
- Connect BMW diagnosis system
- Release seat occupancy detector
- Clear fault memory if necessary
Seat with air conditioning:
Remove A/C fan from support.
Installation:
Make sure fans have correct cable routing (1).