51 47 065 Removing And Installing / Replacing Finishing Strip At Front Left Or Right Entrance

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 317

Unclip clips (1) for finishing strip (2) with special tool 00 9 317.

Remove finishing strip (2).

Fig 1: Identifying Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If necessary, replace faulty clips (1 and 2).

Fig 2: Identifying Clips

Courtesy of BMW OF NORTH AMERICA, INC.