51 45 115 Removing And Installing Speaker Frame On Panel For Instrument Panel At Top

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 340

Unclip speaker trim (1) with special tool 00 9 340.

Fig 1: Identifying Special Tool (00 9 340)

Courtesy of BMW OF NORTH AMERICA, INC.

Lever out speaker frame (2) in direction of arrow.

Disconnect plug connection from solar sensor (1) and remove speaker frame (2).

Fig 2: Removing Speaker Frame

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Locks (2) must not be damaged.

Replacement only:

Remove solar sensor (1) . See 64 11 992 REMOVING AND INSTALLING/REPLACING SOLAR SENSOR .

Fig 3: Identifying Locks

Courtesy of BMW OF NORTH AMERICA, INC.