51 45 031 Replacing Instrument Panel Trim

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove instrument panel trim . See 51 45 030 REMOVING AND INSTALLING INSTRUMENT PANEL TRIM .

Release screws (1) and remove ignition starter switch (2).

Fig 1: Identifying Ignition Starter Switch And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Modify all attachment parts (air ducts, brackets, trims, clips and grommets).

Fig 2: Identifying Instrument Panel Trim

Courtesy of BMW OF NORTH AMERICA, INC.