51 32 420 Removing And Installing/Replacing Trim On Front Door Window Frame, Left Or Right

Necessary preliminary tasks: 

• Remove front window cavity cover strip  . See 51 21 302 REMOVING AND INSTALLING/REPLACING CHROME STRIP FOR WINDOW CAVITY COVER STRIP (ON OUTSIDE OF FRONT DOOR) .

Partially detach rubber window seal (1) at rear.

Installation: 

Coat rubber window seal (1) with water before fitting.

Fig 1: Detaching Rubber Window Seal

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Press trim (2) towards rear and lever out sideways.

Fig 2: Identifying Trim And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Remove trim (1) towards top.

Fig 3: Removing Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

If necessary, replace faulty plastic nuts (1).

Fig 4: Identifying Plastic Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Check trim (1) for damage, replace if necessary.

Fig 5: Identifying Trim

Courtesy of BMW OF NORTH AMERICA, INC.