51 22 302 Removing And Installing/Replacing Chrome Strip For Window Cavity Cover Strip, Rear Left Or Right

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 311

Stick adhesive tape (2) below window cavity cover strip (1) (risk of damage).

Using special tool 00 9 311 (starting at front and proceeding to rear), lever out window cavity cover strip (1).

Installation:

Moisten window cavity cover strip (1) with water.

Window cavity cover strip (1) must be flush at front and rear with door edge.

Fig 1: Identifying Special Tool (00 9 311)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Seal (1) must be correctly fitted in chrome strip (2).

Initialize power window . See 67 62 ... NOTES ON INITIALIZING POWER WINDOW .

Fig 2: Identifying Seal And Chrome Strip

Courtesy of BMW OF NORTH AMERICA, INC.