51 16 204 Removing And Installing/Replacing Rear Cup Holder
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
Specification with normal rear seat:
- Remove rear seat . See 52 24 005 REMOVING AND INSTALLING/REPLACING REAR SEAT (NORMAL) .
Specification with normal/electric rear seat:
- Remove seat middle section . See 52 25 002 REMOVING AND INSTALLING PADDING FOR LEFT OR RIGHT REAR SEAT .
Release screws (1).
Remove cup holder (2) towards front.