51 14 000 Removing And Installing/Replacing Front BMW Badge

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 318

Lever out badge with special tool 00 9 318 and remove towards top.

Fig 1: Identifying Special Tool (00 9 318)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Following parts of badge (1) must not be damaged or missing:

2 Guide pins

3 Grommets

Fig 2: Identifying Guide Pins And Grommets

Courtesy of BMW OF NORTH AMERICA, INC.