51 12 050 Removing And Installing / Replacing Carrier For Rear Bumper Trim
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove bumper trim . See 51 11 156 REMOVING AND INSTALLING FRONT BUMPER TRIM .
Remove shock absorber (1) towards rear.
Release nuts (2) on left/right.
Remove carrier (3).
Tightening torque. See 12 REAR BUMPER .