37 14 525 Replacing Control Unit For Air Supply Unit
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Read and comply with notes on protection against electrostatic damage (ESD protection)
. See 61 35 ... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE)
.
After installation:
- Replacement only: Carry out programming/coding . See VEHICLE PROGRAMMING AND CODING .
- Carry out ride-height calibration . See 37 12 012 CARRY OUT RIDE-HEIGHT-CALIBRATION .
Remove ignition key.
Remove battery cover.
Unclip control unit and pull out in upwards direction.
Disconnect plug connection (1).