37 14 027 Removing And Installing / Replacing Rear Mounted Acceleration Sensor
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Read and comply with notes on protection against electrostatic damage (ESD protection)
. See 61 35 ... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE)
.
Necessary preliminary tasks:
- Detach rear right wheel arch cover partially (in rear area) and swing right support to one side
Unscrew nuts (1).
Disconnect plug connection (2).
Remove rear mounted acceleration sensor.