36 11 522 Removing And Installing/Replacing Front Receiving Antenna For RDC

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Observe safety instructions on raising the vehicle. See 00 ... ... LIFTING VEHICLE WITH A LIFTING PLATFORM .

Front left

Remove front left wheel arch trim (1).

Fig 1: Identifying Front Left Wheel Arch Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Front right

Partially detach front right wheel arch trim (1).

Fig 2: Identifying Front Right Wheel Arch Trim

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Operations for removing and installing receiving antenna at front left or right are identical.

Unfasten plug connection (1) and disconnect.

Slacken screw (2) and remove receiving antenna (3) to left or right.

Fig 3: Identifying Plug Connection, Screw And Antenna

Courtesy of BMW OF NORTH AMERICA, INC.