35 40 001 Removing And Installing/Replacing Accelerator Pedal Module

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Unscrew screw.

Pull accelerator pedal module upwards out of fixture.

Installation:

Tightening torque . See PEDALS - TIGHTENING TORQUES - ALPINA .

Fig 1: Pulling Accelerator Pedal Module Upwards Out Of Fixture

Courtesy of BMW OF NORTH AMERICA, INC.

Pull off plug (1).

Remove accelerator pedal module.

Fig 2: Identifying Plug

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Accelerator pedal module can only be replaced completely with adapter plate.