34 11 250 Removing And Installing / Replacing A Brake Carrier / Brake Guard Plate At Front
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove front brake disks . See 34 11 220 REMOVING AND INSTALLING/REPLACING BOTH FRONT BRAKE DISCS .
Release screws (1) and remove brake guard plate (2).
Installation:
Tightening torque. See BRAKES - TIGHTENING TORQUES -- ALPINA .