33 55 040 Replacing Stabilizer Link For Rear Left Or Right Stabilizer

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Observe safety instructions on raising the vehicle . See 00 ... ... RAISING VEHICLE WITH TROLLEY JACK .

Release nut; if necessary, grip brace at Torx socket.

Installation:

Replace self-locking nut.

Tightening torque. See REAR AXLE - TIGHTENING TORQUES - ALPINA .

Fig 1: Locating Self-Locking Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut; if necessary, grip brace at Torx socket.

Remove stabilizer link.

Installation:

Replace self-locking nut.

Tightening torque. See REAR AXLE - TIGHTENING TORQUES - ALPINA .

Fig 2: Locating Self-Locking Nut

Courtesy of BMW OF NORTH AMERICA, INC.