17 11 370 Removing And Installing/Replacing Cooling Loop For Power Steering (BMW ALPINA B7)

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove radiator core . See 17 00 ... REMOVING AND INSTALLING/REPLACING RADIATOR CORE (BMW ALPINA B7) .

NOTE: Texts refer to and illustrations show the left side.
The procedure is identical for the right filter side.

Release line (1) for cooling loop from holders.

Fig 1: Identifying Line

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw.

Tightening torque: 5 Nm.

Remove cooling loop (1) towards front.

Fig 2: Identifying Cooling Loop

Courtesy of BMW OF NORTH AMERICA, INC.