11 28... Removing And Installing/Replacing Radial Compressor Drive Belt (BMW ALPINA B7)
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 11 5 170
Necessary preliminary tasks:
- Remove design cover. Turn quick-release couplings through 90° and remove left design cover. Release screws and remove middle design cover.
NOTE:
If the drive belt is to be reused, mark direction of travel and reinstall drive belt in same direction of rotation.
Press back belt tensioner with special tool 11 5 170 in direction of arrow and remove drive belt (1).
NOTE:
Illustration shows radiator core removed!