LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1476 (Engine - Technical Data) >> 25 Piston With Rings And Pin >> 11 25 Pistons with Rings and Pins N52K B30

11 25 Pistons with Rings and Pins N52K B30

WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
TECHNICAL DATA - PISTONS WITH RINGS AND PINS N52K B30

Piston and pin are paired to each other - replace together only.    
Measuring point "A" (position) mm 14
Piston diameter at measuring point "A"    
Original (new dimension) mm 84.990±0.010
Repair stage (new dimension) mm %
Oversize (new dimension) mm 85.240±0.010
Piston installation clearance (piston new) mm 0.000...0.034
Piston installation clearance (piston worn) mm 0.020...0.047
Permissible total wear tolerance between piston and cylinder (engine operated) mm 0.150


TECHNICAL DATA - PISTONS WITH RINGS AND PINS N52K B30

1st groove    
End clearance mm 0.150 ... 0.300
Axial play mm 0.020 ... 0.070
2nd groove    
End clearance mm 0.300 ... 0.500
Axial play mm 0.020 ... 0.060
3rd groove    
End clearance mm cannot be measured
Axial play mm cannot be measured