LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 147 (Suspension - Front) >> Removal & Installation >> Strut With Coil Spring >> Assembly

Strut With Coil Spring: Assembly

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2007 BMW 550i, 2007 BMW 530i, 2007 BMW 525i, 2006 BMW 550i, and 2006 BMW 530i. However, it is still accessible from the selected car via links, so may be relevant.
  1. To assemble, reverse disassembly procedure. Check all components and replace, if necessary. Replace self-locking nuts and tighten to specification. See TORQUE SPECIFICATIONS .
  2. Coil spring must fit positively in lower spring plate/spring pad. See Fig 1.
Fig 1: Fitting Coil Spring In Lower Spring Pad
G00315136Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals