Minimum set: Mechanical tools
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
In conjunction with: 33 2 150 (E53)
NOTE:
For removing and installing output shaft in drive flange as well as for removing front wheel bearing unit.
Series: E30, E31, E32, E34, E36, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E81, E83, E85, E86, E87, E90, E91, E92, E93, RR1, RR2
Storage location: C13, C14, C38
Order number: 33 2 110
Removal and installation tool
Consisting of:
1 = 33 2 111 Pressure spindle
NOTE:
For pressing out. Model series: E30, E31, E32, E36, E38, E39, E46, E53, E65, E66, E67, E83, E85
4 = 33 2 114 Spindle
NOTE:
For installation / model series: E30
5 = 33 2 115 Nut with bearing
NOTE:
Model series: E30, E31, E32, E36, E38, E39, E46, E52, E53, E60, E61, E65, E66, E67, E83, E85, RR1
6 = 33 2 116 Bridge
NOTE:
New version 09/98 Model series: E30, E31, E32, E36, E38, E39, E46, E52, E53, E60, E61, E65, E66, E67, E83, E85, E90, RR1
7 = 33 2 117 Threaded piece
NOTE:
Model series: E30, E31, E32, E36, E38, E39, E46, E53, E65, E66, E67, E83, E85
8 = 33 2 118 Spindle for installation
NOTE:
Model series: E31, E52, E53, E60, E61, E65, E66, E67, E83
9 = 33 2 119 Spindle
NOTE:
For installation / model series: E36, E46