61 1 150 Releasing Tool Kit

WARNING: This page is about a different car, the 2007 BMW 760Li, 2006 BMW 760Li, and 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

Note: For circular connector / press-out tool Contains kits 61 1 130, 61 1 140 and 61 1 180 Replaced by special tool 61 0 300 from 09/2005.

Series: E12, E21, E23, E24, E28, E30, E31, E32, E34, E36, E38, E39, E46, E52, E53, E65, E66, E83, E85, R50, R53, RR1

Storage location: K 106

Order number: 61 1 150

Releasing tool kit

Fig 1: Identifying Releasing Special Tools Kit

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

61 1 151 Press-out tool

Note: For Power timer contacts / AMP and Bosch Replaced by special tool 61 0 315 from 09/2005.

61 1 152 Press-out tool

Note: For Micro timer contacts Replaced by special tool 61 0 323 from 09/2005.

61 1 153 Releasing tool

Note: For retaining tab of relay holder

61 1 154 Replacement sleeve dia. 1.5 mm for 61 1 139

Note: Order number was temporarily assigned for case inlay in 8/95 on delivery of case Replaced by special tool 61 0 311 from 09/2005.

61 1 155 Replacement sleeve dia. 3.5 mm for 61 1 133

Note: Replaced by special tool 61 0 306 from 09/2005.

61 1 156 Replacement sleeve dia. 2.5 mm for 61 1 132

Note: Replaced by special tool 61 0 304 from 09/2005.

61 1 157 Replacement sleeve dia. 1.5 mm for 61 1 131

Note: Replaced by special tool 61 0 302 from 09/2005.

61 1 158 Case with inlay

Note: Replaced by special tool 61 0 329 from 09/2005.

61 1 159 Operating instructions

61 1 131 Press-out tool

Note: Replaced by special tool 61 0 301 from 09/2005

61 1 132 Press-out tool

Note: For 2.5 mm round contacts Replaced by special tool 61 0 303 from 09/2005.

61 1 133 Press-out tool

Note: For 3.5 mm round contacts Replaced by special tool 61 0 305 from 09/2005.

61 1 134 Press-out tool

Note: For Mini flat spring contacts Replaced by special tool 61 0 312 from 09/2005.

61 1 135 Press-out tool

Note: For standard flat spring contacts Replaced by special tool 61 0 314 from 09/2005.

61 1 136 Press-out tool

Note: For Power timer contacts (G & H) Replaced by special tool 61 0 316 from 09/2005.

61 1 137 Press-out tool

Note: For timer contacts Replaced by special tool 61 0 313 from 09/2005.

61 1 138 Socket wrench

Note: For telltale lamps (instrument cluster)

61 1 139 Press-out tool

Note: Slotted sleeve for Kostal round contacts with dia. 1.5 mm Replaced by special tool 61 0 311 from 09/2005.

61 1 141 Releasing tool

Note: For D 2.5 / ELA, 4-pin, round

61 1 142 Releasing tool

Note: For D 2.5 / ELA, 7-pin, round

61 1 143 Releasing tool

Note: For D 2.5 / ELA, 12-pin, round

61 1 144 Releasing tool

Note: For D 2.5 / ELA, 25-pin, round

61 1 145 Releasing tool

Note: For D 1.5 / ELA, 10-pin, round

61 1 149 Replacement blades

Note: For press-out tool 61 1 148

61 1 148 Press-out tool for SLK

Note: SLK = sensor laminated contacts Replaced by special tool 61 0 319 from 09/2005.

61 1 180 Press-out tool

Note: For load current contacts Replaced by special tool 61 0 318 from 09/2005.