33 4 460 Set of tools
WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760i, 2006 BMW 760Li, and 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.
Minimum set: Mechanical tools
In conjunction with: 33 4 450
NOTE:
For removing and installing camber arm rubber mount on rear axle carrier.
Series: E60, E61, E63, E64, E65, E66, E67, E70, E81, E82, E83, E85, E86, E87, E90, E91, E92, E93, RR1, RR2
Storage location: B49, C49
SI number: 1 15 04 (117)
Order number: 33 4 460
Set of tools
Consisting of:
1 = 33 4 461 Draw-in disk
2 = 33 4 462 Pull-out disk
3 = 33 4 463 Counter support
4 = 33 4 464 Support sleeve
5 = 33 4 465 Spindle 205 mm, M12
6 = 33 4 466 Pressure nut