33 4 150 Removal and installation tool

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760i, 2006 BMW 760Li, and 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

In conjunction with: 33 4 140, 33 3 371

NOTE: For removing and installing rubber mount on rear axle carrier

Series: E38, E39, E39tou, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E83, E85, E86, RR1, RR2

Storage location: B38, B8, C7, C8

SI number: 1 06 94 (801)

Order number: 33 4 150

Removal and installation tool

Fig 1: Removal/Installation Tool (33 4 150) Components And Assembly

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 33 4 151 Pressure plate

NOTE: For removal / model series: E38, E39, E46, E52

2 = 33 4 152 Pressure plate

NOTE: For installation Model series: E38, E39, E46, E52, RR1

3 = 33 4 153 Support plate

NOTE: For installation / model series: E38, E39, E46, E52

4 = 33 4 154 Spindle with lock nut

NOTE: Model series: E38, E39, E46, E52, E60, E61, E63, E64

5 = 33 4 155 Nut with bearing

In conjunction with: 33 3 371 (E46)

6 = 33 4 156 Spindle, long

NOTE: Model series: E39/2, E65, E66, E67, RR1

7 = 33 4 157 Pressure plate

NOTE: For installation-model series:

E39/2, E65, E66, E67, RR1

8 = 33 4 158 Pressure plate

NOTE: For removal-model series: E53, E65, E66, E67, RR1

9 = 33 4 159 Support disk