33 2 100 Clamping fixture

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760i, 2006 BMW 760Li, and 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For gripping output shafts when pressfitting constant-velocity joint

Series: E12, E21, E23, E24, E28, E30, E31, E32, E34, E36, E36/7, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E81, E82, E83, E85, E86, E87, E90, E91, E92, E93, RR1, RR2

Storage location: C23

SI number: 1 06 94 (801)

Order number: 33 2 100

Clamping fixture

Fig 1: Clamping Fixture (33 2 100)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 33 2 101 Frame

2 = 33 2 102 Insert shell (2 x)

NOTE: Diameter 30 mm-model series: E38 / model: 730i

3 = 33 2 103 Insert shell (2 x)

NOTE: Diameter 35 mm-model series: all, except E38