11 2 000 Puller

WARNING: This page is about a different car, the 2008 BMW 760Li, 2007 BMW 760Li, and 2006 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

Fig 1: Puller (11 2 000) Components And Assembly

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: For crankshaft sprocket

Engine: M10, M30, M50, M52, M60, M62, M70, M73, N62TU, N73, S14, S38, W10, W11

Storage location: B9, C42

Order number: 11 2 000

Puller

Consisting of:

1 = 11 2 001 Bell housing

2 = 11 2 002 Plate

NOTE: Engine: M10, M30, S14, S38, N73

3 = 11 2 003 Spindle

NOTE: Engine: M10, M30, M70, M73, S14, S38, N73

4 = 11 2 004 Plate

NOTE: Engine: M50, M52, M60, M62

5 = 11 2 005 Spindle 165 mm

NOTE: Engine: M50, M52, M60, M62

6 = 11 2 006 Plate

NOTE: Engine: M70, M73, N73

7 = 11 2 007 Thrust piece

NOTE: Engine: N73