72 11 092 Removing And Installing/Replacing Rear Left Or Right Seat Belt

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove rear seat . See 52 26 005 REMOVING AND INSTALLING / REPLACING REAR SEAT .
Version with 3rd seat row only:
Fold rear seat forwards
Remove adapter plate . See 52 26 ... REMOVING AND INSTALLING BACKREST LOCK ADAPTER PLATE .

Release screw (1) on end fitting.

Installation:

Replace screw.

Tightening torque. See PARTS AND ACCESSORIES - TIGHTENING TORQUES - X5 .

Fig 1: Identifying Seat Belt Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Installation:

Replace screws.

Tightening torque. See PARTS AND ACCESSORIES - TIGHTENING TORQUES - X5 .

Remove belt deflector (2).

Release screws (3).

Tightening torque. See PARTS AND ACCESSORIES - TIGHTENING TORQUES - X5 .

Remove deflector bar (4).

Fig 2: Identifying Deflector Bar And Belt Deflector

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Installation:

Replace screws.

Tightening torque. See PARTS AND ACCESSORIES - TIGHTENING TORQUES - X5 .

Remove automatic reel (2).

Installation:

Inertia reel unit is coded against incorrect installation (2).

Fig 3: Identifying Automatic Reel With Screws

Courtesy of BMW OF NORTH AMERICA, INC.