67 31 520 Removing and Installing/Replacing Drive Unit For Seat Height Adjustment

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove front seat.
Remove outer cover on front seat.

Disconnect plug connection (1).

Loosen screws (2).

Feed out drive unit for seat height adjustment (3) and remove.

Fig 1: Disconnecting Plug Connection And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Comfort seat only:

Replacement:

Initialize drive unit for seat height adjustment.